1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer

Sens.it Clip-Pin RS 2 US

SKU: 5623934

PDFŠtampa
Sens.it Clip-Pin RS 2 US for Snap-In valves
Nije podešena slika
1-4w.gif
Opis

Blank TPMS sensors which can be programmed using the PROFILER TPM II or the sens.it database.

  • For Snap-In valves
  • Easy and quick installation and removal of the valve
  • Valve is removed and installed on the rim in the same way as a conventional rubber valve

Please note:

  • TPMS Snap-In valves are subjected to considerably higher stresses than standard Snap-In valves
  • The TPMS Snap-In valves must always be replaced whenever tyres are changed
  • Application limited to speeds below 210 km/h
  • Exclusively recommended for the replacement of OE TPMS Snap-In valve solutions
  • Tyre pressure must not exceed 4.5 bar (65 psi)
  • If in doubt, we recommend the sens.it Clamp-In valve option
Scope of Delivery:
  • 1 Sensor
  • 1 Installation guide
  • 1 sens.it TPMS Snap-In valve
Komada u kutiji1